News Office Field Order Support About Us



Dayton, OH Training Class - Nov 14

October 15, 2014 - Farm Works Software® will be hosting a Level 1 training class in Dayton, OH on November 14, 2014.  This is a great opportunity to learn how to better utilize the software while networking with other users at the same time.

Laptops are welcome, but not required.  If you are bringing your own laptop, please make sure you have the latest version of software installed and registered prior to attending. 

Cost of training is $135 per person.  Class size is limited so be sure to register early by calling Roger DuMond at 800-346-1569 or Don Garrett at 937-286-0407.

LOCATION:
Trimble-Dayton Division Office
5475 Kellenburger Road
Dayton, OH
Door #3

AGENDA:
8:00-8:45     Registration, computer setup
8:45-9:00     Introductions, Class details
9:00-10:30   Basic Field Recordkeeping
10:30-10:45 Break
10:45-noon  Introduction to Mapping or Introduction to Accounting (Choose which topic you want to attend)
noon-12:45  Lunch
12:45-2:00  Mapping or Accounting
2:00-2:15    Break
2:15-4:00    Mapping or Accounting
4:00-4:30    Questions and Answers

Contact Roger DuMond at 800-346-1569 or Don Garrett at 937-286-0407 to register



October Online Newsletter
/ Other / Newsletters / Oct14_pic.jpg In this issue:
  • Now Available: Connected Farm Field
  • Two-Way File Transfer with Connected Farm Fleet
  • View Rainfall Variability for each Field
  • New Option for Filing W2's and 1099's
  • Online Training Schedule


New! Auto Pipe Sizing in Surface

May 22, 2014 - Automatic pipe sizing is now available in the latest version of Farm Works™ Surface software - version 2014.07. The new feature allows contractors and farmers to decrease errors and increase efficiency when designing farm drainage systems.

/ Other / News / Connected Farm / Surface-FAQ-Image.jpg


August Online Newsletter
/ Other / Newsletters / Aug14_pic.jpg In this issue:
  • Monitor Your Crop Health
  • Manage Your Farm From the Ground Up
  • Farm Works Surface Now Supports All Elevation Data
  • [Video] Flying the Trimble UX5 in Agriculture
  • Farm Progress Countdown
  • Online Training Schedule


Version 2014.09 Now Available

August 1, 2014 - Farm Works Software® has released version 2014.09.36 of the Office software.


Enhancements include:

  • Create Topographic Maps Using Other Layers (Surface) – utilize 3rd party elevation data for drainage designs. Prior versions of Farm Works Surface only supported elevation data from Trimble’s FmX® display or the WM-Topo™ survey system. Now you can create a drainage design from elevation collected from yield data or some other source; however, it is recommended to use elevation data that was mapped with RTK accuracy.
  • NDVI Fix (Mapping) – resolved random crashes when exporting NDVI Track3d layers as shape files.
  • Node Tool Fix (Mapping) – fixed issue where deleting multiple nodes sometimes does not delete each one.
  • CNH Updates (Mapping)– enhancements specific to CNH.
    • Support for reading and writing XCN-2050 display data.
    • Added an option to read in CNH Prescription Maps in a .cn1 file
  • Replant Fix (Mapping) – fixed variety maps so they account for replants.  If a part of a field is replanted, the variety map will only show the replanted variety (based on the date of the job).
  • Added Skip Option for Read Job Data (Mapping) -  added option to Skip Confirming Supplies, Equipment & People in Read Job Data.  If the data being imported has all of the required attributes and this option is selected, the user will no longer have to click OK in each of the properties box.
  • AGCO Task Data Fix (Mapping) – resolved issues with lockups reading some AGCO Task data and displaying it incorrectly if engine hours are recorded.

 

Customers of the Office software who are subscribed to the Update Service Plan (USP) will automatically receive these features by selecting “Check for Updates" located under the Help menu.  Another option is to use the download link: http://www.farmworks.com/support/downloads.php



FAQ - Create Topo Maps with Other Layers

August 1, 2014 - Farm Works™ version 2014.09 or higher includes the ability to utilize 3rd party elevation data for drainage designs. Prior versions of Farm Works Surface only supported elevation data from Trimble’s FmX® display or the WM-Topo™ survey system. Now you can create a drainage design from elevation collected from yield data or some other source; however, it is recommended to use elevation data that was mapped with RTK accuracy.

/ Other / News / Connected Farm / Surface-FAQ-Image.jpg


June Online Newsletter
/ Other / Newsletters / June14_pic.jpg In this issue:
  • Automatic Pipe Sizing Now Available
  • Utilizing Wireless Data Transfer at Crossroads
  • New Irrigate App for Trimble's Irrigate-IQ Solution
  • Utilization Now Available in Fleet Manager
  • Easier Access to Original Data Files
  • Dashboard Supports TMX-2050 Display Data
  • Online Training Schedule


Design a Corn Maze in 2014

May 21, 2014 - Are you planning a corn maze in 2014?  Farm Works offers the perfect combination of software and mobile solutions to create your own maze.  This solution can handle anything from simple designs to more elaborate mazes that people will be talking about for years.

Where do you start?  Utilize the Farm Works™ Maze Kit by taking your design (such as an image from a maze designer) and easily geo-reference it using simple mapping tools on your desktop computer.  Next, take your image to the field on a mobile computer and start cutting the design using GPS.  Farm Works offers a variety of mobile computers that provide different levels of GPS accuracy.  The Trimble® Juno® T41 "G" series handheld is a high performance integrated GPS solution that offers repeatable 1-2 meter accuracy in the palm of your hand - a perfect partner for cutting corn mazes.

 

/ Other / News / Corn Maze / Jake_Maze.jpg 


FAQ - Using Office Sync

May 2, 2014 - Farm Works™ version 2014 or higher allows you to send and receive data files wirelessly between the office and field.  This version offers improvements to Office Sync such as reprocessing data from the Trimble server.

/ Other / News / Connected Farm / OfficeSync-CF-Image.jpg


Version 2014.06 Now Available

May 2, 2014 - Farm Works Software® has released version 2014.06.28 of the Office software.


Enhancements include:

  • Filter Payable Payments by Date (Accounting) – payable payments can now be filtered by date range so you can easily pay bills within a set date range.  
  • Support for Scroll Wheel in Account Register (Accounting)
  • Enter Descriptions for Other Expenses/Revenues (Accounting) – enter additional information for each expense or revenue. This is especially useful for entering part numbers or other details when more than one item is purchased in a transaction.
  • Expanded Node Tool Functionality (Mapping) – multiple points can be selected when using the node tool for editing or removing points.
  • CNH Updates (Mapping)– there were many enhancements specific to CNH. 
    • More attributes on map for CNH Sugarcane/Advanced Trip data.
    • Support for “GPS Quality” as an attribute for CNH jobs.
    • Added advanced option to use or not use filter when Reading CNH data useful for reading data for small areas such as test plots.
    • Support for CNH E-Notes.
    • Support for reading the details of tank mixes.
  • Precision Planting Fix (Mapping) – updated to include the writing of field boundaries.
  • Ag Leader *.agdata Update (Mapping) -  firmware update to support latest *.agdata files.
  • Support for Reading FmX Track3D Point Files (Mapping) – streamlined the process of importing Track3D point files from the Trimble FmX® integrated display.  This feature is especially helpful when importing data from Trimble’s GreenSeeker® crop sensing system.
  • Office Sync Enhancements (Connected Farm) – added functionality to right-click and hide devices, multi-select devices, and right-click on devices to process inbox.  Hiding devices are extremely important when more than one project is used so that you can control the devices assigned to each project.
  • Export All Reports in a .CSV Format (All Programs) – all reports can now export as text using a .csv format, including the accounting reports.

 

Customers of the Office software who are subscribed to the Update Service Plan (USP) will automatically receive these features by selecting “Check for Updates" located under the Help menu.  Another option is to use the download link: http://www.farmworks.com/support/downloads.php


Goto Page: 1 2 3 4 5 6 7 8 9 10
Privacy Statement | Terms of Use | Copyright 2009, Trimble Navigation Limited